How quickly can you install structural walls in Penrith?

It depends on the job. Wall quantity, height, corners and openings set the base duration. Access, material lead times, concrete availability and footing readiness move it from there. Once we've reviewed the project set, we give you an installation programme you can build around.

Which structural wall systems do you install in Penrith?

We supply and install Dincel, AFS Rediwall®, Ritek and Clearform. The system on your drawings is the system we install. Selection sits with your designer and structural engineer, and our crews bring installation experience across all four.

Do you install basement walls around waterproofing in Penrith?

We install the walling system and coordinate with the waterproofing contractor on sequence, membrane interfaces, penetrations and pour stages. Waterproofing design and the system's water-resistance performance come from your engineer, waterproofing consultant and the manufacturer.

What do you need to quote a Penrith project?

Send us the architectural and structural drawings, the specified system, the site address and any access or laydown notes. A target start date and your build programme help us confirm crew availability and wall cycle timing.

Which nearby suburbs do you service?

We work across the Penrith LGA, including St Marys, Kingswood, Jamisontown, Glenmore Park, Jordan Springs, Emu Plains, Werrington, Cambridge Park, Erskine Park and Mulgoa, as well as the Blue Mountains foothills and the wider Western Sydney Aerotropolis area.

Structural Wall Installers in Penrith, NSW

Murs Projects supplies and installs Dincel, AFS Rediwall®, Ritek and Clearform structural walling systems for residential, commercial and industrial projects across Penrith and the Nepean.

From retaining and basement walls on new estates in Jordan Springs and Glenmore Park to lift cores, OSD tanks and party walls for medium-density builds near the Penrith CBD, our crews install to the approved drawings and work to the builder's programme.

CONSULT NOW

Our Proven
Installation Process

1

Consultation & Requirements

Meet with clients to discuss project goals and gather detailed requirements for a clear understanding of the scope.

2

Planning

Present a customised proposal with recommended systems, timelines, and budget to align with client needs and understanding of the scope.

3

Scheduling

Develop a project plan, organise resources, and schedule materials, equipment, and professionals to ensure the project stays on track.

4

Execution & Quality Control

Begin on-site work with ongoing oversight, performing quality checks to meet safety and compliance standards.

5

Completion & Client Review

Finalise the project, conduct a walkthrough with the client, and provide documentation and post-project support.

Why Choose Murs Projects?

Integrity

Every quotation, timeline, and scope of work we commit to in Dee Why reflects exactly what we deliver. Transparent from the first conversation to the final sign-off.

Accountability

The same experienced team that scopes your Dee Why project sees it through to completion, compliance documentation and all. No hand-offs.

Knowledge

Our team has completed structural walling installations across dozens of Northern Beaches projects — from duplex party walls to multi-residential basement systems. We understand what Dee Why's medium-density market demands.

Commitment

Medium-density projects in Dee Why run on tight programmes. We coordinate our installation around your trades, keep materials on schedule, and protect your critical path.

Passion

Structural walling is our entire business. That singular focus means every installer on your Dee Why site knows the system, the compliance requirements, and how to work efficiently in an infill build environment.

Our Installation Services in Penrith, NSW

Murs Projects supplies and installs permanent formwork and structural walling systems across Penrith, St Marys, Kingswood and Emu Plains. Every package is planned around the site, the approved drawings and the trade sequence, with agreed installation records handed over at completion

Retaining walls

Cut-and-fill lots across Glenmore Park, Mulgoa and the foothills around Emu Heights regularly include retaining walls in the approved design. We install the specified Dincel or AFS Rediwall® system to the engineer's set-out, coordinating with the excavator, steel fixer and concreter so the wall is ready for inspection on schedule.

Lift Shaft

We install lift shaft and stair core walls for residential flat buildings, aged care and commercial projects in Penrith. Accurate set-out of openings, embeds and wall dimensions keeps the core aligned with slabs, landings and the lift installer's requirements as the structure climbs.

Duplexes

Penrith's townhouse and dual-occupancy pipeline, from Caddens to Werrington, runs on repeatable wall packages. We install party walls, basement walls and internal structural walls to the engineer's design, staged so each dwelling moves through its wall cycle without holding up the next.

Internal Load Bearing Wall

We install permanent formwork for the internal load-bearing walls shown on your structural drawings, from custom homes to multi-residential blocks. Our crews check set-out against the grid, then coordinate penetrations, openings and bracing before the wall is closed up and poured.

OSD tanks

Where the approved stormwater plan includes an on-site detention tank, we install the walling system to the hydraulic and structural drawings. We check tank dimensions, slab junctions, penetrations and waterproofing interfaces before we start, so clashes surface on paper rather than on site.

Basement Wall

Basement car parks under apartment and mixed-use projects around the Penrith CBD and Kingswood need clean set-out and tight trade coordination. We install Dincel and AFS Rediwall® basement walls to the approved design and sequence our work around the waterproofing contractor, penetrations and pour stages.

Wall & Columns

We install permanent formwork walls and structural columns for houses, townhouses, apartments and commercial buildings across Penrith and St Marys. Each package is planned around wall heights, corners, floor interfaces and the pour sequence agreed with the builder and structural engineer.

Blade Wall

Blade walls are increasingly used in Penrith residential and commercial projects for both structural and design purposes. Murs Projects installs blade wall systems to engineer specification, with quality checks and compliance documentation as standard.

Facade Wall

Facade wall systems in Penrith mid-rise and medium-density developments need to perform structurally and aesthetically. We install Dincel and Clearform facade wall systems to specification, with compliance documentation included.

Our Projects

Permanent Formwork Solutions For Your Project

We are suppliers and installers of advanced permanent formwork systems across Sydney.

Dincel Construction System: The Dincel Construction System is an internationally patented permanent polymer formwork for walls and columns. When filled with ready-mixed concrete, it creates a strong, durable, and cost-effective structure. Fast to install and ideal for residential, commercial, and infrastructure projects like retaining walls, basements, lift cores, and structural columns, Dincel offers significant time savings. It is developed in Australia and certified by the University of New South Wales and CSIRO.

AFS Rediwall®: Rediwall® is a PVC permanent formwork system with precision-extruded components that easily snap or slide together for quick installation. It creates a smooth, clean, water-resistant surface, often requiring no finishing. Ideal for basements, columns, party walls, lift/stair cores, retaining walls, and retention tanks, Rediwall® delivers efficiency and reliability in every project.

Ritek: Ritek is a leading provider of innovative building solutions, specialising in high-performance insulated panels for various construction applications. Their advanced panel systems are designed to provide superior thermal efficiency, sound insulation, and fire resistance, making them ideal for both residential and commercial projects. Ritek panels are quick to install, cost-effective, and environmentally friendly, offering long-lasting durability

Clearform: Clearform is a transparent, lightweight concrete formwork system that combines strength with aesthetic appeal. Its smooth, clean finish is ideal for architectural projects, providing durable, visually striking exposed concrete surfaces. Easy to install and maintain, Clearform offers both functionality and design flexibility, delivering exceptional results in every project.

Want
to Know
More?

Call us today on 0420 203 076 or message us below us for more information or a quotation for your next project

Penrith Wall Installation FAQs

“I have used Murs Projects for a few sites and they are an excellent company to work with, Professional team, high-quality workmanship, great communication, and the projects are completed on time. Very reliable and easy to deal with — highly recommend!”

Lorraine Ajjaka